KronosX
Nuev@ Applesan@
PSP Audioware VintageWarmer v2.3.0 VST RTAS AU MAC OSX
5znslz.jpg[/IMG]
PSP VintageWarmer is a high-quality digital simulation of an analog-style, a single or multi band compressor/limiter. It combines warm analog sound with a straightforward user interface, and comes with a rich library of presets. The plug-in processor is highly flexible and can be used for both single and multi-band compression, as well as brick-wall limiting. This makes it an essential tool for mixing and mastering engineers.
Careful attention has been paid to PSP Vintage Warmer's overload characteristics with the processor being capable of generating saturation effects typical of analog tape recorders. PSP Vintage Warmer also incorporates professional VU and PPM metering together with accurate overload indicators thereby assuring professional quality results.
PSPaudioware updates PSP VintageWarmer to v2.3.0
17th December 2009
PSPaudioware has updated PSP VintageWarmer to v2.3.0. It's now available for Windows 32- and 64-bit and Mac OS X UB in VST, AU and RTAS plug-in formats.
New features:
Mono-Stereo switch expanded to Mono-Stereo-Left-Right selector. Now it is possible to choose only one channel for processing.
?Controller and automation support for ProTools users improved.
Changes:
Latency improvement - PSP VintageWarmer has 127 samples of latency.
Latency improvement - PSP VintageWarmer2 has 639 samples of latency now.
Meters in VU mode has improved needle movement response according to VU specifications.
Front panel name of the PSP VintageWarmer2 was changed from PSP VintageWarmer to PSP VintageWarmer2.
Front panel name of the PSP VintageWarmer was changed from PSP VintageWarmer LE to PSP VintageWarmer.
Bug fixes:
Initial click in Logic with PSP VintageWarmer2 - solved.
Various weird GUI behavior and crashes caused by the PSP VintageWarmer2 - solved.
Channel lockup and noises with PSP VintageWarmer2 - solved.
Gain Reduction meter shows improper values when Ceiling not at 0dB - solved.
Various weird meter behavior and synchronization problems - solved.
Known issues:
Due to channel routing changes we advice to check the Mono-Stereo-L-R selector state.
Thanks to the reduced latency we advice to check up your track synchronization. In the case of the manual latency compensation please reset your delays to adequate values.
The Meter delay knob on the rear panel is not present in this version.
Tow VU/PPM and Scale range parameters have new - more adequate names now.
MeterScale changed to MeterType (VU/PPM) and MeterRange changed to MeterScale.
In some applications there might occur a strange meters' behavior in GR mode on silence right after initialization.
Big thanks to Team DYNAMICS!
Minimum System Requirements:
Mac OSX 10.4 or later,
Intel Mac or PowerPC G4 or G5,
512 MB RAM
AudioUnit, VST or RTAS compatible host application,
ProTools TDM/LE 7.3 or later for running RTAS
Download
5znslz.jpg[/IMG]
PSP VintageWarmer is a high-quality digital simulation of an analog-style, a single or multi band compressor/limiter. It combines warm analog sound with a straightforward user interface, and comes with a rich library of presets. The plug-in processor is highly flexible and can be used for both single and multi-band compression, as well as brick-wall limiting. This makes it an essential tool for mixing and mastering engineers.
Careful attention has been paid to PSP Vintage Warmer's overload characteristics with the processor being capable of generating saturation effects typical of analog tape recorders. PSP Vintage Warmer also incorporates professional VU and PPM metering together with accurate overload indicators thereby assuring professional quality results.
PSPaudioware updates PSP VintageWarmer to v2.3.0
17th December 2009
PSPaudioware has updated PSP VintageWarmer to v2.3.0. It's now available for Windows 32- and 64-bit and Mac OS X UB in VST, AU and RTAS plug-in formats.
New features:
Mono-Stereo switch expanded to Mono-Stereo-Left-Right selector. Now it is possible to choose only one channel for processing.
?Controller and automation support for ProTools users improved.
Changes:
Latency improvement - PSP VintageWarmer has 127 samples of latency.
Latency improvement - PSP VintageWarmer2 has 639 samples of latency now.
Meters in VU mode has improved needle movement response according to VU specifications.
Front panel name of the PSP VintageWarmer2 was changed from PSP VintageWarmer to PSP VintageWarmer2.
Front panel name of the PSP VintageWarmer was changed from PSP VintageWarmer LE to PSP VintageWarmer.
Bug fixes:
Initial click in Logic with PSP VintageWarmer2 - solved.
Various weird GUI behavior and crashes caused by the PSP VintageWarmer2 - solved.
Channel lockup and noises with PSP VintageWarmer2 - solved.
Gain Reduction meter shows improper values when Ceiling not at 0dB - solved.
Various weird meter behavior and synchronization problems - solved.
Known issues:
Due to channel routing changes we advice to check the Mono-Stereo-L-R selector state.
Thanks to the reduced latency we advice to check up your track synchronization. In the case of the manual latency compensation please reset your delays to adequate values.
The Meter delay knob on the rear panel is not present in this version.
Tow VU/PPM and Scale range parameters have new - more adequate names now.
MeterScale changed to MeterType (VU/PPM) and MeterRange changed to MeterScale.
In some applications there might occur a strange meters' behavior in GR mode on silence right after initialization.
Big thanks to Team DYNAMICS!
Minimum System Requirements:
Mac OSX 10.4 or later,
Intel Mac or PowerPC G4 or G5,
512 MB RAM
AudioUnit, VST or RTAS compatible host application,
ProTools TDM/LE 7.3 or later for running RTAS
Download
