jejeje Por andar de regaño ahora yo tengo el mismo problema del amigo BASSe, super paisano como lo resuleve o amigo BASSe dime porfavor si lo pudiste resolver
Mira paisano en mi nother board yo tengo un menu que dice power (llamemosle menu 1), ahi fue el unico lugar donde decia acpi y mas o menos te voy a describir como es para que me ayudes ya que dices que activandolo o desactivandolo puede funcionar.
Mira hay un menu que ACPI dentro de el (llamemosle menu 2) esta de nuevo ACPI pero tiene dos opcion S1 state y S3 state, y bueno en el cuadro de informacion dice
"S1 is the safest mode but consumes more power. S3 consumes low power but drivers may not support his estate"
Dentro de ese mismo menu (el menu 2) hay otra opcion que dice WAKE ON LAN FROM S5 y tiene dos opciones STAY OFF y POWER ON y la info dice:
"Determines the action of the system when a PCI power management Enable wake up event occurs".
Regresando al menu 1 hay otra opcion que dice After Power Failure y tiene tres opciones STAYS OFF, POWER ON y LAST STATE y en el cuadro de info dice:
"Determines the mode of opration is a power loss occurs. Stays off sstem will remain off once power is restored. Power on, boots the system after power is restored. Last State restored the system to the same state it was in before power failed."
debajo de estas opciones en el menu 1 hay una leyenda que dice
"The optin below are not related to ACPI and may be ignored when shutting dewn using an ACPI OS"
Y debajo de esta leyenda hay otra opcion (la ultima) que dice WAKE ON PCI PME y tiene dos opciones POWER ON y STAY OFF y dice de info:
"Determines the action taken when the system power is off and PCI Power Management Enable wake up event occurs"
Bueno paisano espero y sirva de algo, y sino te agradere enormemente si me puedes explicar para que sirven estas opciones, gracias y porfavor a los que ya les sirve este dvd ayudenmeeeeeeee